rt2ya 5ni27 7ith7 bs2fy knbf3 bai5k yh6h6 7aff3 dba2i 735y8 k8ird atdii s7yid nfezn 63r7n 34bsk 96hih ni4tz b9szi y9s4z 6yihr Nintendo Switch BSOD but with strange behaviour |

Nintendo Switch BSOD but with strange behaviour

2021.12.02 15:55 EclecticUser Nintendo Switch BSOD but with strange behaviour

A while back now I bought a blue screen Switch as a donor, but recently I decided to mess about with the board. I popped it into a screen assembly, and oddly it turned on and booted. I tested it for a while with different games, in and out of the dock and everything worked fine so I gave it to a friend to use. However after a couple of weeks it went again. Hard reset didn't work so I got it back from them to have a look.
My initial thought went straight to hardware and either the Tegra or the RAM. I don't have the equipment to reball either of those so I was about to give up and demote it to a donor again when I found the beginning of what I have not come across before.
I had taken the board out to examine it a little, but when I put it all back together, having done absolutely nothing, it worked. So I used it for a while and sure enough a few days later, it went again. Hard reset did nothing, so I left it to the side and forgot about it for a week. When I went back and tried it again, it worked.
I thought it had to be the thermal cycle causing a connection under one of the chips to fail, but the next time it went I just took the back off and unplugged the battery for a few seconds and it came back to life immediately.
I'm so confused. Has anybody come across this before?

As a TL;DR
Switch with intermittent BSOD
Works if you leave it powered off for a period of time (possibly around a week), but fails again after a random amount of time
Works immediately if you disconnect and reconnect the battery but fails again after a random amount of time
Assumed the root cause was hardware connections failing due to thermal cycling, but that doesn't explain why unplugging the battery works straight away. Now considering a possible firmware issue?
submitted by EclecticUser to consolerepair [link] [comments]


2021.12.02 15:55 Tattoobutterfly The Los Rhinos NFT project “Own to Earn”🦏

The Los Rhinos NFT project “Own to Earn”🦏 The Los Rhinos project
Los Rhinos is an NFT project built on Moonriver and created in collaboration with a team of developers and a Swiss artist: Noé Ferret. We let our artist’s imagination run wild so that he could create a concept that he felt strongly about.
Los Rhinos is a collection of 3,333 unique collectibles representing badasses rhinoceros that know what streetwear is. Each Rhino in the collection will be randomly assigned style elements (cap, jacket, glasses, horns, etc). Each will be completely different and unique.
Los Rhinos also features an “Own to Earn” system. Owners of Los Rhinos will be able to receive rewards in the form of royalties in the weeks following the initial sale.
Why a Rhinoceros?
The choice of the Rhinoceros is also one of Noé’s choices and we built a complete universe around his concept. The choice of this animal also pushed us to learn about rhinos in the real world which is an endangered species and already extinct for the white rhinos of Africa. We wanted to participate in the fight that all these associations lead in our way.

https://preview.redd.it/nd8t798ke6381.jpg?width=1246&format=pjpg&auto=webp&s=ce48218c8bdcf04977d568739c3501cf25d627a0
submitted by Tattoobutterfly to NFTsGiveaway [link] [comments]


2021.12.02 15:55 Tulip_fun Harm reduction

(24f) Hi y’all, I’ve dealt with EDs since I was 12 and have been having a really tough time with purging recently. I’m working with my therapist to extinguish the behavior, but in the meantime I’m worried about my teeth. Any suggestions? Do acid reducers help?
submitted by Tulip_fun to bulimia [link] [comments]


2021.12.02 15:55 the_trend_memo Abo Residence / Kidosaki Architects Studio

Abo Residence / Kidosaki Architects Studio submitted by the_trend_memo to IWantToLiveThere [link] [comments]


2021.12.02 15:55 MakoII86 Betrayal

Betrayal submitted by MakoII86 to TheCycleFrontier [link] [comments]


2021.12.02 15:55 scarface128 What should I improve on my TH8 base?

What should I improve on my TH8 base? submitted by scarface128 to ClashOfClans [link] [comments]


2021.12.02 15:55 PartsmanND CRTX +5% in last 15 minutes

submitted by PartsmanND to Shortsqueeze [link] [comments]


2021.12.02 15:55 badkittytime Why is it falling apart?

submitted by badkittytime to Suzuki [link] [comments]


2021.12.02 15:55 TradFortyFive [FREE] EST GEE x ICEWEAR VEZZO TYPE BEAT - "Tripping Off The Juice"

[FREE] EST GEE x ICEWEAR VEZZO TYPE BEAT - submitted by TradFortyFive to YouTubePromoter [link] [comments]


2021.12.02 15:55 Xtremee_ghost The MCU but is the 90s- Illustrated

submitted by Xtremee_ghost to Marvel [link] [comments]


2021.12.02 15:55 Reasonable_Row5715 ☘️ Weed Factory | 8% BUSD holding rewards | Stealth launched 1 hour ago| Doxxed dev/admin team| Low Fees & Market Cap | 100x potential 🚀

Weed Factory just stealth launched, & is refreshingly awesome. We are taking the BS out of the BSC. 8% BUSD holding rewards, big goals, active 24/7 team, super ambitious⛽️
We are NUTS for Weed Factory. Hold your $WEED for as long as possible, and your rewards will feel so much better 🤑💰💦
What is $WEED⁉️
Well I'm glad you asked! $WEED is the nuttiest, most rewarding BUSD token in town. Weed Factory has an army of stoners spamming weed and stuff.☘️ The developer is a nutty genius who understands the importance of hodling your $WEED. The marketing team has a bunch of crazy shizniz ready to throw all up in yo bizniz. The longer you hold your $WEED, the bigger and better your rewards will feel. #HODLTHEWEED🥜
100% DIAMOND BALLING - Our main goal of this project is to build a community of HODLERS who are not willing to sell until we reach our goals of x100 market cap since the start. Our team carefully picked the 15% presalers and we are sure that no one will be selling for atleast the first six months. This is turn will attract new buyers & higher prices.
Great tokenomics and team, max bag available for 0.5BNB as of this post, this is 100% a moonshot, get on early. Initial snipers/early buyers are OUT & it’s the perfect time to buy the dip.
Liquidity has been locked for 5 years at launch.
https://deeplock.io/lock/0x7F39e75B366Ec58c2E3913935392DD9FD8c7F3a1
Weed Factory is the stoney-est token on the BSC!
Tokenomics
✅ 8% BUSD Rewards
✅ 1% liquidity
✅ 1% marketing
✅ 3% max wallet
☘️ Links:
🔹 BUY HERE: https://pancakeswap.finance/swap?outputCurrency=0xf1155f4badad0430532ae63530cfef8cf942664c
🔹 Renounced Ownership: https://bscscan.com/token/0xf1155f4badad0430532ae63530cfef8cf942664c#readContract
📄 Contract: 0xf1155f4badad0430532ae63530cfef8cf942664c
submitted by Reasonable_Row5715 to SatoshiBets [link] [comments]


2021.12.02 15:55 timoteostewart C950: bug in my code made me think I was a terrible algorithm maker for like 2 weeks

I caught a bug that has been in my algorithm since almost the very beginning, and it's why I've been beating my head against the desk for two weeks trying to achieve the distance goal on my traveling salesman problem.
Story time. In C950 you have to write an algorithm where you deliver 40 packages to 27 locations all over Salt Lake City and you have to minimize the total distance traveled (i.e., keep it under 140 miles). Some packages arrive late to the starting hub, and some packages have to be delivered by a certain deadline, so I was keeping track of time in the algorithm by using an offset of minutes from 8:00 am. So 8:00 am was zero, and 9:05 am would be 65 and 10:30 am would be 150, and so forth. Using offsets made it easy to tell whether one package was due sooner than another or whether a package was able to leave the starting hub yet or not.
To determine whether my algorithm meets the distance requirement of less than 140 miles, I just multiply how many minutes the truck was out delivering packages, since at the given speed of 18 miles per hour, the truck travels 0.3 miles per minute. Multiple minutes by 0.3 and you get miles. Easy peasy.
Now on to the bug. I had a variable that I was using to keep track of cumulative miles traveled for the various trucks. For each truck, I multiplied the time offset by 0.3 to get miles traveled. I have been frustrated with my algorithm for like two weeks because I kept getting mileage up around 200 miles, which is way above the 140 mile requirement. I have been racking my brain and scouring the internet for additional ways to optimize the truck routes and squeeze efficiency out of this algorithm. Here's the code I used to calculate the mileage of each truck route:

total_mileage_for_this_route = cur_time_as_offset * config.MILES_PER_MINUTE 
At the end of the truck's route, cur_time_as_offset is the time the truck arrives back at the starting hub. So a truck that leaves at 8:00 am and returns at 10:45 am will have a cur_time_as_offset of 165 when the route is complete. Boom, the truck was on the road for 165 minutes, which if we multiply by 0.3 we get 49.5 miles traveled.
The line of code above works fine for the trucks that leave at 8:00 a.m., since the offset from 8:00 am is equal to the number of minutes the trucks spend on the road. BUT this code doesn't work for trucks that depart the starting hub any time after 8:00 am. For example, a truck that leaves the starting hub at 9:05 am and returns at 12:20 pm will end up with a cur_time_as_offset of 260 (i.e., 12:20 pm). My algorithm was reporting that this truck had a distance traveled of 78 miles (260 * 0.3 = 78). WRONG! The truck left the hub when the current time was 9:05 am, which is an offset of 65. Then it returned when the current time was 12:20 pm, which is offset 260. The miles traveled is 0.3 times the DIFFERENCE between ending offset and starting offset. Here's the debugged line of code:
total_mileage = (cur_time_as_offset - departure_time_as_offset) * config.MILES_PER_MINUTE 
When I catch bugs like this I never know whether to laugh or to cry. Ha! Fortunately I can usually laugh at myself. But gee whiz. What a bug. My algorithm has been plenty efficient and optimized for the past two weeks, but this bug made my final mileage report super inflated so I didn't even know it.
submitted by timoteostewart to WGU_CompSci [link] [comments]


2021.12.02 15:55 Lu_Be_Mu Virgens

quantos mais velhos ficam mais supertimam o sexo e ao mesmo tempo mais sem graça vai ser quando fizer
não vai ser "entediante" pela expectativa que você colocou, mas sim porque quanto mais velho mais vc perde o gosto do negocio
mas claro colocar expectativa ajuda a piorar a primeira vez.
ser virgem com mais de 18/20 anos é como ter o iphone 6 em 2021, já não é mais novidade, ninguem vai ficar tão feliz quanto ficaria se recebesse quando lançou
submitted by Lu_Be_Mu to desabafos [link] [comments]


2021.12.02 15:55 jookco Death - Dead - Obituary News : Clayton County police officer shot and killed responding to double murder, shooting of child Click link to read full story.

submitted by jookco to DeathObituaries [link] [comments]


2021.12.02 15:55 Nervous_Ad9894 Učiteľka ideme písať ja:

Učiteľka ideme písať ja: submitted by Nervous_Ad9894 to Duklock [link] [comments]


2021.12.02 15:55 Wide-Aioli-8082 تا حالا براتون اتفاق افتاده

تا حالا براتون اتفاق افتاده submitted by Wide-Aioli-8082 to keoXer [link] [comments]


2021.12.02 15:55 ADdreaming never ask

never ask submitted by ADdreaming to libsofreddit [link] [comments]


2021.12.02 15:55 jookco Otis Anderson Jr Death - Dead - Obituary News : If you watched UCF, you knew who Otis Anderson Jr was. One of the most talented players on the field and a big part of UCFs succ... Click link to read full story.

submitted by jookco to DeathObituaries [link] [comments]


2021.12.02 15:55 Xanexee Crypto exchanges 'thought they could throw a fastball' by the SEC, but enforcement is coming, Chairs Gensler, Clayton warn

Crypto exchanges 'thought they could throw a fastball' by the SEC, but enforcement is coming, Chairs Gensler, Clayton warn submitted by Xanexee to CryptoMarkets [link] [comments]


2021.12.02 15:55 NumberHippy88 At our third apartment, my husband yelled at me for being too out of breath to walk back home.

I’m usually really fit and athletic. I was pregnant in 2012, and before I broke my foot, I was so out of breath and nauseated, that I couldn’t walk back from 7-11 on one of our walks together. He got so mad at me that he left me sitting on the walkway, with a heat rash on my calves, face turning red from being in the sun and heat, and trying to breathe. Now people are trying to pass me off as someone else and say it wasn’t me. Well, my heat rash is gone now, but my birthmark hasn’t changed. Every obgyn has seen my birthmark from doing everything from paps to ultrasounds to delivering my children. Oh, and the health office on my college campuses have seen it, too. Both campuses. They make you put on that examination gown for each appointment, and not to mention, blood donations prove that I am me. There is no replacement for me. And no one was trying to replace me until I birthed a girl. How sexist is that? It’s like punishing me for having a female child in my second pregnancy, instead of a male child again.
submitted by NumberHippy88 to Vent [link] [comments]


2021.12.02 15:55 BlankVerse The end of HIV transmission in England is within sight, but we can’t be complacent

The end of HIV transmission in England is within sight, but we can’t be complacent submitted by BlankVerse to Health [link] [comments]


2021.12.02 15:55 Big_Oven8562 Branching for dummies?

I need someone to explain this to me because I feel like an idiot and I'm getting frustrated. This is at least the third time I've tried to get even a rudimentary understanding of git and it just doesn't take.
I'm walking through this guide because based on the title it should be my speed: https://medium.com/@rukeeojigbo/git-basics-an-idiots-guide-99445a56bd65
Switching between branches sounds simple enough. So I create FirstBranch and edit a text file in it. Cool, git status lets me know there are new changes it detected. Well I don't want to commit anything yet, I want to continue playing around with branches. So I create SecondBranch and check the text file. The text file has the same content that it did on FirstBranch. I guess that makes sense since we were sitting in FirstBranch when we created SecondBranch. I edit the text file with some blurb about it being in SecondBranch. Branches are basically just folders I can swap between right, so let's hop back over to FirstBranch and see that other version of the text file that doesn't have any references to SecondBranch. Oh it does have references to SecondBranch, which means this doesn't work at all the way I thought it did. Now I'm just confused and frustrated.
I need an idiot's guide to git and I'm beginning to think one doesn't exist because it's simply too complex of a tool for me and I'm going to just go back to manually making dated copies of the project folder every time I need to snapshot progress.
submitted by Big_Oven8562 to git [link] [comments]


2021.12.02 15:55 TradFortyFive [FREE] EST GEE x ICEWEAR VEZZO TYPE BEAT - "Tripping Off The Juice"

[FREE] EST GEE x ICEWEAR VEZZO TYPE BEAT - submitted by TradFortyFive to YoutubeProducers [link] [comments]


2021.12.02 15:55 legritche_nabotiseur Bertrand éliminé, c'est VRAIMENT la BONNE nouvelle de la journée ?

Pas de Macron 2 à cette présidentielle !
Quand je pense qu'ils n'ont pas arrêté de nous soûler avec des sondages de 2nd tour avec lui.
Il serait vraiment temps que les sondeurs fassent des enquêtes avec des candidats qui n'ont pas forcément le meilleur score au 1er tour !
Hidalgo / Macron
Pécresse / Macron
par exemple.
submitted by legritche_nabotiseur to YahooQR [link] [comments]


2021.12.02 15:55 Daatebayo How do i beat this level?

submitted by Daatebayo to mkxmobile [link] [comments]


http://sushi-alder.ru